Blazing Twist Lock Connectors

  • A silicone-filled waterproof connector that is an excellent connector for use in irrigation and landscape lighting applications. Optimal use in low voltage applications (30V max, 10 amps)


  • BlazinSpecs
    • Connector Size: 1.5” x .675”
    • Wire Type: Copper/Copper
    • Wire Range: Min #18/Max #12
    • Temperature Rating: 194°F
    • Silicone Sealant Temperature: -40°F to 400°F


    • A – 1.44”
    • B – 0.675”
    • C – 0.487”

    Installation Instructions

    IMPORTANT: Turn off power before installing or removing a connector. Product to be used in accordance with local and national codes.

    1. Strip wires ½” (12.7mm) and align frayed strands and conductors. Pre-Twisting of wires unnecessary.
    2. Hold stripped wire ends evenly together. Lead stranded wire(s) beyond solid wire ends by approximately 1/16” (1.6mm)
    3. Firmly hold wire combination together and insert it through the center of the cap on the end of the connector.
    4. Continue to push and twist (clockwise) until hand tight. 1 to 2 wire wraps should be visible. Do no over torque.
Scroll to Top