Roman High Strength Concrete Mix 5,000+ PSI

PREMIUM V-CRETE 5000 CONCRETE is a quality blend of portland cement, graded sand, and coarse aggregate.

DESCRIPTION

PREMIUM V-CRETE 5000 CONCRETE is a quality blend of portland cement, graded sand, and coarse aggregate. It is designed to be used in applications at least 2 inches thick. Specially designed for structural and load-bearing applications, including foundations, footings, walkways, drives, slabs, and anchoring posts and poles, Roman V-Crete is designed to exceed the specifications of ASTM C 387 for the most demanding contractor jobs.

Compressive Strength:
3,000 psi (20.7 MPa)
5,000 psi (34.7 MPa)
6,000 psi (41.4 MPa)

Mixing:
One 80 lb. (36.4 kg) bag will require up to 4 quarts (3.7 L) of water. Thoroughly mix the contents of the bag with 3 quarts (2.8 L) of water, adding the remaining water a little at a time if the mix is too stiff. Adding too much water will weaken the mix and may cause cracking in the surface.

Finishing:
Use a screed or straight edge to level the surface. Newly poured concrete should set for about an hour or until the surface water begins to disappear before finishing. Trowel to a smooth finish, but do not overwork the surface. Over-troweling or finishing the surface too soon can lead to scaling, cracking, or dusting of the surface.

Curing:
Concrete cures under proper moisture and temperature conditions. It’s important to keep the surface damp for several days after placement. Methods include misting, applying a curing agent, or placing plastic over the surface. Protect the concrete from freezing for at least 24 hours after placement.

Coverage:
One 80 lb. bag will yield approximately .60 cubic feet (.016 cu. m). To estimate the number of 80 lb. bags needed for a job, multiply the length x width x depth (all in feet), then divide by .60.

PLEASE NOTE: This is not the same “High-Strength” Concrete Mix that our competition typically carries. This is professional grade, 5000+ psi concrete mix.

Scroll to Top